Products / CO2 Incubators / Friocell evo – Large Volume CO2 Incubators
Friocell EVO - Large Volume CO2 Incubators
Patented Forced Air Convection
FRIOCELL® EVO large volume CO2 incubators are designed to create accurate and reproduceable conditions for cell growth procedures, tissue, virology, and other culturing procedures. The patented forced air convection system provides even temperature distribution throughout the chamber, while the drift-free infrared (IR) sensor provides maximum reliability and measurement precision during the entire incubation process.
Previous
Next
Specifications
Heat Technology:
Patented Forced Air Convection System
Patented Forced Air Convection System
Chamber Volumes:
222 (8 ft³) • 404 (14.3 ft³) • 707 (25 ft³) 1212 (43 ft³)
222 (8 ft³) • 404 (14.3 ft³) • 707 (25 ft³) 1212 (43 ft³)
Temperature Range:
-20°C up to 100°C
-20°C up to 100°C
Sterilization Cycle:
160°C dry heat sterilization
160°C dry heat sterilization
CO2 Concentration:
0.1% up to 20%
0.1% up to 20%
Sensors:
Infrared Drift Free CO2 Sensor
Infrared Drift Free CO2 Sensor
Filtration:
HEPA Filter on incoming CO2 gas tubing
HEPA Filter on incoming CO2 gas tubing
Control System:
EVO digital controller with Fuzzy Logic algorithm
EVO digital controller with Fuzzy Logic algorithm
Chamber Construction:
AISI 304 Seamless Stainless Steel with rounded corners
AISI 304 Seamless Stainless Steel with rounded corners
Electrical Data:
230V 50/60Hz
230V 50/60Hz
Compliance:
CE, UL, CSA listed
CE, UL, CSA listed
Chamber Construction
The FRIOCELL® is equipped with a pharmaceutical grade AISI 304 stainless steel chamber with a double wall construction to prolong life expectancy. The inner chamber features a seamless, rounded corner design and is fully removable for easier cleaning and sterilization. The door of the chamber employs a patented 4-point closing system that seals the door to the chamber gasket and enables hands-free opening and closing.
- AISI 304 stainless steel chamber – 316L stainless steel option available
- Double wall chamber construction with 5 layers of insulation for more uniform internal chamber conditions
- Removable inner chamber with seamless, rounded corner design for easier cleaning & sterilization
- 4-point closing system that seals the door to the chamber gasket – automatic or key door lock options availabe, door sensor and alarm option available
- Inner glass door allows viewing into the chamber without affecting internal conditions
- (2″) 50 mm stainless steel port – (1″) 25, (2″) 50, (4″) 100 mm access port options available
- Shelf brackets that do not penetrate the chamber walls – brackets are molded into the inner chamber walls 2.8″ apart
EVO Digitial Controller
BMT USA’s advanced EVO controller utilizes fuzzy logic to assess process data, including operation temperature, chamber size, and other controlled elements. Based on the assessed data, the controller can make continuous adjustments to input values, such as heating intensity or cooling, to optimally regulate internal chamber conditions. With the goal of minimizing the time required to meet set process parameters, units equipped with the EVO controller can quickly ramp up to the exact temperature set point without overshooting. The result is reduced overall cycle time, power consumption, and recovery times after opening the chamber door(s).
5.7″ LCD color display – glove friendly touch screen
Fuzzy logic enabled microprocessor
100 programs each with up to 100 segments for varying loads and parameters
Real-time control of temperature ramp settings, heating sequences, and cycling
Graphic display of cycle parameters
LED indicator of device operation
Constant monitoring of chamber conditions
USB port & SD card slot with Microsoft Excel formatted data storage
RS 232 port
Optional Ethernet port & WiFi connectivity
Delayed heating start & stop function
DIN 12880 digital safety thermostat
Acoustic and digital alarms
Multi-level secure user authentication – FDA CFR 21 part 11 compliant
Remote access
Heat Technology
BMT Patented Forced Air Convection System
BMT’s patented force air convection system moves air vertically and horizontally inside the chamber for precise temperature uniformity and fast heating and cooling times. The process of heating from the bottom of the chamber to the top mimics natural airflow, allowing for more precise simulation of climatic conditions.
CO2 Sensor
All BMT FRIOCELL® EVO large volume CO2 incubators are equipped with a Vaisala drift free infrared CO2 sensor. The sensor provides accurate CO2 measurements at all times, ensuring samples are always culturing at the correct CO2 concentration levels. The drift free CO2 sensor also eliminates the need for additional auto-referncing/zeroing of the sensor to prevent drifting of the CO2 calibration.
Optional Equipment
Shelving
Stainless steel wire shelf
Stainless steel perforated shelf
Construction
Automatic key and door lock
Door sensor and alarm
Adjustable feet or casters with smooth travel and extendable leveling feet
Rolling cart
Window with 3 layers of insulating glass for observation of samples inside the chamber – complimented by interior lighting with mechanical switch
Interior light – heat resistant with mechanical switch or an electronic switch that is automatically activated when the door opens
Waterproof 115V or 230V electrical socket inside the chamber
PT 100 flexible sensor
Stainless stacking frame for model 111 & 222
Functionality
Oxygen control – 1% up to 19%
Automatic CO2 tank change over manifold
Single & 2-stage CO2 regulators
Compliance
IQ/OQ validation documentation with temperature mapping – DIN 12880
Warmcomm software – FDA CFR 12 Part 11 compliant
Building management monitoring system
Region specific electrical plug