(360) 863-2252

CO2cell Comfort

3-Circuit Fanless Direct Heat System + Optional O2 Control

CO2cell comfort incubators combine a 3-circuit, fanless direct heating system with optional Tri-gas O2 control to create constant and reproducible conditions for cell and tissue culture growth. The direct heating system eliminates the need of a fan and lowers the risk of vibrations and cross-contamination. A precise CO2 infrared sensor with high stability provides maximum reliability and measurement accuracy throughout the process. The direct heated chamber makes installation and maintenance easy, and the inner glass door is sealed, allowing you to inspect samples without affecting conditions within the chamber.

Technical Specifications

Working Temperatures

5°C above ambient up to 60°C

Heat Technology

3-circuit, fanless direct heat system

Chamber Volumes

50 (1.71 ft³)  •  190 (6.71 ft³)

Chamber Construction

AISI 304 stainless steel chamber

Non-Controlled Relative Humidity

Up to 95% RH at 37°C

Sterilization Cycles

160°C & 200°C

CO2 Concentration

0.1% up to 20%

Tri-gas O2 Control [optional]

1% up to 20% O2 concentration

Sensors

Infrared drift free CO2 sensor

Control System

Standard digital controller

Electrical Data

115V 50/60Hz

Regulatory Labels

CE, UL, CSA listed

Key benefits of a fanless incubator

Easy to Clean

Easier to clean and significantly reduced risk of contamination

Gentle Airflow

No turbulent airflow that may easily spread contamination introduced into the chamber

Zero Vibration

Eradicates any possibility of cell edging effect

Minimal Evaporation

Minimizes water loss due to evaporation – less risk of sample evaporation and possible desiccation

Increased Space

Considerably more usable space due to the lack of ducting or built-in HEPA filters in front of the fan

Low Maintenance

No fan maintenance or HEPA filter replacement required.

Device Features & Optional Equipment

CO2 Incubator set on a table

Pharmaceutical-Grade Stainless Steel Chamber

CO2cell incubators are equipped with a pharmaceutical grade AISI 304 stainless steel chamber with a double wall construction to prolong life expectancy. The inner chamber features a seamless, rounded corner design and is fully removable for easier cleaning and sterilization. The door of the chamber employs a patented 4-point closing system that seals the door to the chamber gasket and enables hands-free opening and closing.
  • AISI 304 stainless steel chamber
  • Heated inner glass door eliminates condensation and allows for viewing of samples without affecting conditions inside the chamber
  • Optional compartmentalized inner glass doors to minimize loss of conditions
    50L (1.73) chambers: 4 compartment doors  |  190L (6.73) chambers: 8 compartment doors
  • Seamless, rounded corner chamber design for easier cleaning and sterilization
  • Removable shelves and shelf racks for ease of cleaning
  • (1″) 25 mm stainless steel access port